Automatic Chemical Metering & Dispenser Kit for RV & Marine Toilets


ECONOMICAL and CONVENIENT

Eliminates guessing! Finally a dispensing system that uses a non-electric chemical injector that controls the correct amount of chemical with every flush. Other products require a full 8 ounces for treatment. Blue Streak Chemical is carefully measured each time so you only use precisely what is needed - no waste or spillage

FULLY AUTOMATIC

Each time you flush, Blue Streak Chemical is automatically dispensed into your system. OVER 400 flushes to one quart of chemical

EVERYTHING YOU NEED IS IN THE BOX!

Each dispenser kit includes installation instructions, chemical holder with attractive cover, mounting screws, hose clamps, clear vinyl tubing with auto-metering t-valve and one 32 oz bottle of Blue Streak Chemical


HOW IT WORKS

The Blue Streak Dispenser is a chemical injector that adds a metered amount of chemical to the flush line of RV stools. The t-valve is a venturi that creates a vacuum to draw the chemical from the reservoir and mixes it with the water passing through the t-valve. The t-valve also contains a check valve to stabilize the systems between flushes. On the side of the t-valve is a small arrow, which indicates the direction the water needs to flow through it to create a vacuum. If installed backwards it will not draw chemical from the reservoir. The metering tip controls how much chemical to water ratio (or mix) you get in the stool. The approximate mix is one ounce chemical to five gallons of water. It should give you a color mix that is between a royal blue and a sky blue in the stool. The tip is preset and there is no adjustment. The reservoir, which is mounted on the wall, should be no higher than the top of the stool. It can be mounted lower than the stool or in a basement compartment. If the reservoir is mounted higher than the stool, the chemical will flow freely into the bowl and give you a very dark blue color. If you remove the line from the reservoir always be sure to use silicone sealer on the fitting when reattaching the line. The mold line on the stem sometimes will allow chemical to leak out if you don't. The tube pinch on the line between the tank and the t-valve is a service clamp, only for use when repairing the stool, or to stop the flow of the chemical.

INSTALLATION HELP

All Blue Streak Kits come complete with instructions for all popular RV toilets
Detailed instructions may also be viewed and printed online for your convenience



Click here for more information

$49.95

Code: SBSCD
Quantity:  

© 2005 Sisken Sales - Website Owned and Operated By Sisken Sales